|
Ignition Programming and Monitoring
Western Filter Co., Inc. now provides Motortech Ignition Programming and Monitoring Systems
|
 Ignition Monitor
To be used with all Fairbanks Morse IQ products and the full range MOTORTECH IC/MIC product line (with exception of IC920).
Display the following ignition operating data:
- Engine speed
- Ignition timing
- 4 - 20 mA / 0 - 5 VDC input
- Ignition energy level
- Ignition status and error messages
P/N 06.05.040
|
|
 IPS Ignition Pickup Simulator
- Simulation of ignition trigger impulses
- Check of ignition control unit, ignition coils and output wires
- LCD display shows actual speed, programmed speed points & selected trigger configuration
- 4 LED lights show pickup signals and status
- To be used with most common electronic ICs
P/N 07.98.047 For IC, MIC and IQ Ignition Controllers
P/N 07.98.057 For Altronic Ignition Controllers
|
|
 Adaptor Harnesses for IPS Ignition Pickup Simulator
To connect IPS with:
P/N 07.70.001 IC910/IC920
P/N 07.70.002 IC100
P/N 07.70.003 IC500
P/N 07.70.004 IC500A
P/N 07.70.005 IQ250/MIC100
P/N 07.70.009 MIC500
P/N 07.70.010 IC500 CEC
P/N 07.70.004 DISN (Altornic)
P/N 07.70.011 DIS (Altornic)
P/N 07.70.004 CPU90/CPU95 (Altornic)
P/N 07.70.008 CPU2000 (Altornic)
P/N 07.70.007 II-CPU (Altornic)
|
|
 Hand-Held Programmer
Easy to operate hand-held programmer for IC series ignition control units.
- Available as 110 VAC or 220 VAC version
- Direct connection with the RS232 interface of the ignition control unit
P/N 06.05.001 110 VAC Version
P/N 06.05.008 220 VAC Version
|
|
 SparkScan System
Developed for easy measurement of voltage demand and spark duration. For coils mounted under the valve cover of Caterpillar G3500 series engines.
High Voltage Monitoring
Click here for Complete Details
|
|
 Fluke 123 Scopemeter
A scopemeter / oscilloscope is used to read the ignition data from the SparkScan 1 & 3 High Voltage Probes.
P/N 06.98.005-220
|
|
 SparkScan Palm Interface
To operate a Palm Handheld and the integrated SparkScan Software with SparkScan 1 or SparkScan3 you need the SparkScan Palm Interface.
P/N 06.05.041
|
|
 Palm Hand-Held Programmer
The standard Palm handheld organizer will be equipped with the MOTORTECH ignition programming software and so becomes a valuable tool for each service engineer. All other standard features remain usable. Can be used for all Fairbanks Morse IQ and MOTORTECH IC/MIC ignition control units. 90 - 220 VAC.
P/N 06.05.031-m130 Palm m130
|
|
|
|
 AccuTek III - Industrial Ignition Analysis
The AccuTek III provides you with a full range of diagnostic features. Immediately identify defective components and quickly evaluate your entire ignition system - from start to finish.
P/N 44.05.003
|
|
|
