Hospital "400" Level Exhaust Silencers

Like the "300" line, our "400" Level Exhaust Silencers are ideal where ambient noise is low and a high degree of silencing is required. This line can effectively reduce total engine exhaust noise 32-42 dB. All "400" Level Exhaust Silencers can be mounted in any position and feature all welded construction, a durable double wrapped body and an "F" mounting flange (standard in sizes 4" to 14"). Companion flanges are also available for 4" to 22".

Typical Attenuation Curve dB(A)*

(ACTUAL ATTENUATION MAY VARY ACCORDING TO APPLICATION)*Estimated

Application:

These silencers are recommended where ambient noise is low and a high degree of silencing is necessary.

Construction:

Aluminized Steel: Nelson Silencers through 26" O.D. are fabricated of aluminized steel as standard materials. This material has a maximum operating temperature of 1250 F.

Mid Steel/Aluminized Steel: Nelson Silencers 30" O.D. and larger are fabricated of mild steel and aluminized steel. All silencers 30" O.D. through 36" O.D. have aluminized steel bodies with all other components fabricated from mild steel. Silencers 42" O.D. and larger are fabricated from mild steel.

Silicone Aluminum Paint:Nelson Silencers through 26" O.D. are given a coat of high heat resistant silicone aluminum paint.

Primer/Silicone Aluminium Paint:Nelson Silencers 30" O.D. and larger are given a coat of high heat, rust inhibiting primer and then a topcoat of high heat resistant silicone aluminum paint. Physical properties are maintained up to 900F on aluminized steel and 1000F on mild steel.

"F" Mounting Flange:

Standard in sizes 4" to 22". Drilling matches 125/150# ASA standard.

"P" Male Pipe Threads:

NPT ends offered in sizes 3/4" through 4"

Companion flanges available for 4" to 22"

Pressure Drop

Pressure Drop Information
Pressure Drop Graph

Sample Specification:

The silencer is to be a Nelson Indstrial "100" Level Silencer constructed of aluminized steel (26" body diameter and smaller) or mild steel/aluminized steel (larger than 26" body diameter) with all welded construction and suitable for mounting in any position. The silencer shall be complete with the following Nelson accessories: Click here for Sample Specification

Type 1

Part Number A

Nominal Inlet Diameter		 B

Body Dia. O.D.		 C

Body Length		 D

Overal Length		 E

Offset To C/L		 F

Offset To C/L		 G

Inlet Length
41440* 4.0 14.1 66.5 71.9 4.0 4.0 2.7
41450* 5.0 16.1 72.4 80.0 4.7 4.7 3.8
41460* 6.0 18.1 81.2 88.8 5.0 5.0 3.8
41480 8.0 26.1 91.7 98.9 0 0 3.8
41482 10.0 30.1 104.8 111.6 0 0 3.4
41484 12.0 36.1 130.6 137.0 0 0 3.2
41486 14.0 42.1 132.2 138.8 0 0 3.3

Type 3

Part

Number		 A

Nominal Inlet Diameter		 B

Body Dia. O.D.		 C

Body Length		 D

Overal Length		 E

Offset To C/L		 F

Offset To C/L		 G

Inlet Length		 H

Outlet Length
43440 4.0 14.1 66.5 69.2 5.8 4.0 3.0 2.7
43450 5.0 16.1 72.4 76.2 6.0 4.7 4.0 3.8
43460 6.0 18.1 82.3 86.1 6.7 5.0 4.0 3.8
43480 8.0 26.1 91.7 95.3 10.9 0 4.0 3.6
43482 10.0 30.1 104.8 108.4 12.4 0 4.0 2.4
43484 12.0 36.1 130.6 133.8 14.3 0 4.0 3.2
43486 14.0 42.1 132.2 135.6 16.1 0 4.0 3.4

Type 4

Part Number A

Nominal Inlet Diameter		 B

Body Dia. O.D.		 C

Body Length		 D

Overal Length		 E

Offset To C/L		 F

Offset To C/L		 G

Inlet Length		 H

Outlet Length
44840 4.0 14.1 66.5 69.2 33.3 4.0 3.0 2.7
44850 5.0 16.1 71.4 76.2 36.2 4.7 4.0 3.8
44860 6.0 18.1 82.3 86.1 41.2 5.0 4.0 3.8
44880 8.0 26.1 91.7 95.3 45.9 0 4.0 3.6
44882 10.0 30.1 104.8 108.2 52.4 0 4.0 3.4
44884 12.0 36.1 130.6 133.9 65.3 0 4.0 3.3
44886 14.0 42.1 132.2 135.6 66.1 0 4.0 3.4